Linyi Yu Heng Mechanical Chemical Co., Ltd.
Contact: Chairman - Chan Hua -13905390882
Manager - Shang Jun Yu -15376910008
Contact phone: 0539-5778777
Company fax: 0539-5778717
Contact Q Q:948562665
Micro signal: 15376910008
Company mailbox: 948568665@qq.com
Company website: www.yuhengjixie.cn
Address: Xinqiao Town, Lanshan District, Linyi, Shandong
In ordinary cases, the mixture of gases is relatively easy, but in some special occasions the mixture of gases does bring difficulties, such as when the difference between the molecular weight and the mixing ratio is very different. Mixed with a mixed tank, the volume is large, especially for the easy stratification of the difference in molecular weight; a Louis gas resistance that is mixed with a pipe directly and with a small mixture is caused by gas (causing no pressure to go into the system, and the pressure will destroy the pressure of the system). The above problems are more prominent in the case of small flow. In the existing technology, there are no more than two or more than two kinds of gas mixing technology that make the difference of the molecular weight or the difference of the mixing ratio, especially in the small flow.
The purpose of the price of the four way gas mixer can be achieved according to the above principles and the following methods.
When the fluid flows in a pipe, if the pipe is "uniform", the flow of the fluid is "uniform". If the pipe is not "uniform", the pressure of the fluid is smaller in the fast velocity area. If the fluid forms a jet at the outlet of the pipeline, a negative pressure is formed around the outlet of the pipeline.
According to the above principle, the main flow in the mixed gas can be used as the main air flow, and a flow jet nozzle is formed at the end of the tube. When the main flow is flowing and ejected by the jet nozzle, the nozzle is negative pressure. When the outlet of the auxiliary air flow is in this negative pressure area, the auxiliary air flow will flow automatically to the negative. The tendency to press the area. That is to say, in the section of the accessory trachea (connected with the mixing chamber) near the mixing chamber, a negative pressure area is formed, so that the auxiliary gas (small proportion or small molecular weight) is easy to enter the mixing chamber. A collector nozzle is formed in the main pipe near the mixing chamber.